English
русский
EspañolEnergy-Saving Single-Phase Oil-Immersed Pole-Mounted Transformer
15KVA 13.8KV/0.4KV
See Details
How do you install and commission a Low Loss Three-Phase Transformer?
Installation:
Location Selection:
Choose a suitable location that complies with safety regulations and provides adequate ventilation.
Ensure there is enough space for maintenance and cooling.
Foundation:
Prepare a solid foundation capable of supporting the Low Loss Three-Phase Oil-Immersed Distribution Transformer's weight.
The foundation should be level and vibration-resistant.
Transportation and Lifting:
Transport the transformer to the installation site using appropriate methods.
Lift the transformer carefully using suitable equipment.
Alignment:
Ensure proper alignment of the transformer on the foundation.
Connections:
Connect the transformer to the electrical system, ensuring correct phasing and proper grounding.
Oil Filling:
Fill the transformer with the recommended insulating oil, following manufacturer guidelines.
Commissioning:
Inspection:
Conduct a thorough inspection of the transformer, checking for any visible damage or defects.
Oil Testing:
Perform tests on the insulating oil to ensure it meets specified requirements.
Electrical Testing:
Conduct electrical tests, including insulation resistance, turns ratio, and impedance tests.
Protection System Testing:
Test the protection systems to ensure they operate correctly.
Load Testing:
Gradually apply load to the transformer to verify its performance under operating conditions.
Temperature Monitoring:
Monitor the temperature of the Low Loss Three-Phase Oil-Immersed Distribution Transformer during load testing to ensure it stays within acceptable limits.
Control and Monitoring Systems:
Verify the proper functioning of control and monitoring systems.
Documentation:
Complete all required documentation, including test reports and commissioning records.
Training:
Provide training for personnel responsible for operating and maintaining the transformer.
Related Products
-
-
-
-
-
-
-
12000 KVA American Box Type Pad Mounted Transformer
Base kVA: 45 kVA to 12,000 kVA Primary voltage: 2400 V to 46,000 V Secondary voltage: 120 V to 24,940V Basic lmpulse Level (BIL): 30kV to 250kV
See Details
Contact Information
Share
Copyright © Jiangsu Dingxin Electric Co., Ltd. Rights Reserved.
Energy Efficient Transformers Manufacturers Electrical Transformers Factory
Contact Us